Fujitsu LifeBook A3130 BIOS Guide

A Series BIOS

A Series BIOS

2
L i f e B o o k   A   S e r i e s   B I O S
A Series BIOS
BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the 
operating environment for your notebook. Your BIOS
is set at the factory for normal operating conditions, 
therefore there is no need to set or change the BIOS 
environment to operate your notebook.
The BIOS Setup Utility configures:
Device control feature parameters, such as changing
I/O addresses and boot devices.
System Data Security feature parameters, such 
as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility, do the following (or use 
the TrustedCore Menu, as detailed in the next section): 
1. Turn on or restart your notebook.
2. Press [F2] once the Fujitsu logo appears on the 
screen. This will open the main menu of the BIOS 
Setup Utility with the current settings displayed.
3. Press the [RIGHT ARROW] or [LEFT ARROW] key 
to scroll through the other setup menus to review or 
alter the current settings.
Using the TrustedCore Menu
When the Fujitsu logo appears on the screen. press the 
[Enter] key or click on the left mouse or touchpad 
button; the TrustedCore Menu will appear. 
The TrustedCore Menu provides shortcuts to the 
following menus and information screens: 
BIOS Setup
Diagnostic Screen
Boot Menu
Patent Information
System Information
Continue Booting
Clicking on any of the fields will invoke the screen, 
information, or action described.
The Boot Menu can also be invoked by pressing the 
[F12] key when the Fujitsu logo appears on the 
screen.
Navigating through the Setup Utility
The BIOS setup utility consists of six menus: Info, 
System, Advanced, Security, Boot, and Exit. This docu-
ment explains each menu in turn, including all 
submenus and setup items.
The following procedures allow you to navigate the 
setup utility menus:
1. To select a menu, use the cursor keys: 
 
2. To select a field within a menu or a submenu, use the 
cursor keys: 
3. To select the different values for each field, press the 
[Spacebar] or [+] to change to the next lower 
selection and [F5] or [-] to go to the next higher 
selection.
4. To activate a submenu press the [Enter] key.
5. To return to a menu from a submenu, press the [Esc] 
key.
6. To go to the Exit menu from any other menu,
press the [Esc] key.
7. Pressing the [F9] key resets all items in the BIOS to 
the default values.
8. Pressing the [F10] key saves the current configura-
tion and exits the BIOS Setup Utility. You will be 
asked to verify this selection before it is executed.
9. Pressing the [F1] key gives you a general help screen.
Entering the Setup Utility After a Configuration 
Change or System Failure
If there has been a change in the system configuration 
that does not agree with the parameter settings stored in 
your BIOS memory, or there is a failure in the system, 
the system beeps and/or displays an error message after 
the Power On Self Test (POST). If the failure is not too 
Selecting a field causes a help message 
about that field to be displayed on the 
right-hand side of the screen.
Pressing the Enter key with the highlight 
on a selection that is not a submenu or 
auto selection will cause a list of all 
options for that item to be displayed. 
Pressing the Enter key again will select 
the highlighted choice.
[       ], [      ]
[   ], [   ].