JVC RX-F31S Instruction Manual

Specifications

Specifications

48
Designs and specifications are subject to change without
notice.
Amplifier
Output Power
At stereo operation:
Front channels:
100 W* per channel, min. RMS, driven
into 6 
Ω at 1 kHz with no more than 10%
total harmonic distortion.
At surround operation:
Front channels:
100 W* per channel, min. RMS, driven
into 6 
Ω at 1 kHz with no more than 0.8%
total harmonic distortion.
Center channel:
100 W*, min. RMS, driven into 6 
Ω at
1 kHz, with no more than 0.8% total
harmonic distortion.
Surround channels: 100 W* per channel, min. RMS, driven
into 6 
Ω at 1 kHz, with no more than 0.8%
total harmonic distortion.
Surround back channel:
100 W*, min. RMS, driven into 6 
Ω at
1 kHz, with no more than 0.8% total
harmonic distortion.
* Measured on AC 110 V, 127 V, 220 V, and 240 V.
Audio
Audio Input Sensitivity/Impedance:
DVR/DVD (DVD MULTI), VCR, DBS, TV:
330 mV/47 k
Audio Input (DIGITAL IN)*:
Coaxial: DIGITAL IN 1(DVR/DVD):
0.5 V(p-p)/75 
Optical: DIGITAL IN 2(DBS), 3(VCR):
–21 dBm to –15 dBm
(660 nm ±30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS (with
sampling frequency—32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:
DVR, VCR, MONITOR OUT:
330 mV
Signal-to-Noise Ratio (’66 IHF/DIN): 80 dB/62 dB
Frequency Response (8 
Ω):
20 Hz to 20 kHz (±1 dB)
Bass Boost:
+4 dB ±1 dB at 100 Hz
Equalization (at DSP operation):
Center frequency:
63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz
Control range:
±8 dB
Specifications
Video
Video Input Sensitivity/Impedance:
Composite video: DVR/DVD, VCR, DBS:
1 V(p-p)/75 
S-video: DVR/DVD, VCR, DBS:
Y (luminance):
1 V(p-p)/75 
C (chrominance, burst):
0.286 V(p-p)/75 
Component: DVR/DVD, VCR:
Y (luminance):
1 V(p-p)/75 
P
B
, P
R
:
0.7 V(p-p)/75 
Video Output Level/Impedance:
Composite video: DVR, VCR, MONITOR OUT:
1 V(p-p)/75 
S-video: DVR, VCR, MONITOR OUT:
Y (luminance):
1 V(p-p)/75 
C (chrominance, burst):
0.286 V(p-p)/75 
Component: MONITOR OUT:
Y (luminance):
1 V(p-p)/75 
P
B
, P
R
:
0.7 V(p-p)/75 
Synchronization:
Negative
FM tuner (IHF)
Tuning Range:
87.50 MHz to 108.00 MHz
Usable Sensitivity:
Monaural:
12.8 dBf (1.2 µV/75 
Ω)
50 dB Quieting Sensitivity:
Monaural:
16.0 dBf (1.7 µV/75 
Ω)
Stereo:
37.5 dBf (20.5 µV/75 
Ω)
Stereo Separation at OUT(REC):
35 dB at 1 kHz
AM tuner
Tuning Range:
531 kHz to 1 710 kHz (at 9 kHz intervals)
530 kHz to 1 710 kHz (at 10 kHz intervals)
General
Power Requirements:
AC 110 V/127 V/220 V/230 V – 240 V 
,
adjustable with the voltage selector,
50 Hz/60 Hz
Power Consumption:
120 W (at operation)
5 W (in standby mode)
Dimensions (W x H x D): 435 mm x 70 mm x 317.2 mm
Mass:
6.3 kg
EN47-48RXF31S[UJ]2.p65
05.5.13, 16:59
48