JVC RX-F31S Instruction Manual

Operating other manufacturers products

Operating other manufacturers products

44
By changing the transmittable signals, you can use the
supplied remote control to operate other manufacturers’
products.
• Refer also to the manuals supplied with the other products.
• To operate those components with the remote control, first you
need to set the manufacturers’ codes each for the TV, VCR, and
DBS.
• After replacing batteries of the remote control, set the
manufacturers’ codes again.
❏ Changing the transmittable signals for operating
a TV
Set the mode selector to “AUDIO/TV/VCR/DBS.”
1
Press and hold TV 
.
2
Press TV.
3
Enter the manufacturer’s code using buttons
1 – 9, and 0.
See “Manufacturers’ codes for TV” on the right.
4
Release TV 
.
Now, you can perform the following operations on the TV.
TV 
:
Turn on or off the TV.
TV VOL +/–:
Adjust the volume on the TV.
TV/VIDEO:
Change the input mode (either TV or
VIDEO).
After pressing TV, you can perform the following operations on
the TV.
CHANNEL +/–:
Change the channel numbers.
1 – 9, 0, 100+ (+10):
Select the channel numbers.
See the instructions supplied with the TV for details.
5
Try to operate your TV by pressing TV 
.
When your TV turns on or off, you have entered the correct
code.
If more than one code is listed for your brand of TV, try each
one until the correct one is entered.
Operating other
manufacturers’
products
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
Manufacturers’ codes for TV
Manufacturer
Codes
JVC
01
Akai
02
Bell+Howell
03
Centurion
04
Coronad
05
Daewoo
06, 07, 08
Emerson
09, 10, 11, 12, 13
Fisher
14
GE•Pana
15, 16
GE•RCA
17
Gold Star
18, 19
Hitachi
20, 21
KTV
22, 23
Magnavox
24
Marantz
25
Mitsubishi
25
Panasonic
26, 27
Philips
24
Pioneer
28
Proscan
29
Quasar
30
Radioshack
31
RCA
02, 17, 32, 33, 34, 35
Samsung
36, 37
Sanyo
14
Sears
38
Sharp
39
Sony
40
Symphonic
41, 42
Toshiba
38
Zenith
43, 44
Initial setting: 01
EN42-46RXF31S[A]1.p65
05.6.13, 10:38
44