Nikon COOLPIX L23 User Manual
Change settings to Continuous or BSS (best shot selector).
The icon for the current setting is displayed in the monitor when the camera is in
shooting mode (
A 6). No icon is displayed when Single is selected.
A (auto) M d (shooting menu) M Continuous
Single (default setting)
One image is captured each time shutter-release button is pressed.
While the shutter-release button is held all the way down, images can be
continuously captured at approximately 1.4 frames per second up to four frames
(when image mode is set to i 3648×2736).
BSS (Best Shot Selector)
The “best shot selector” is recommended when shooting with the flash off or the
camera zoomed in, or in other situations in which inadvertent motion can result in
When BSS is on, the camera shoots up to ten images while the shutter-release button
is held down. The sharpest image in the series is automatically selected and saved.
Each time the shutter-release button is pressed all the way
down, 16 images are captured at about 30 frames per
second (fps) and the camera arranges them in a single
image. Images are captured with the Image mode fixed at
L (image size is 2560 × 1920 pixels).
• Digital zoom is not available.
Notes on Continuous Shooting
• If set to Continuous, BSS, or Multi-shot 16, the flash cannot be used. The focus, exposure, and
white balance settings are fixed at the values for the first image in each series.
• The maximum frame rate with continuous shooting may vary, depending upon the current image
mode setting, the memory card used, and shooting conditions.
• This feature cannot be used simultaneously with certain features. ➝ “Camera Settings that Cannot
Be Set at the Same Time” (
Note on BSS
BSS is best suited to situations where the subject is not moving. When shooting moving subjects or
when the composition of the picture changes while shooting, the desired results may not be