Panasonic PV-GS320 Operating Instruction

Playback on TV, Playing back card

Playback on TV, Playing back card

Playback mode

44

LSQT1091

Playback on TV

Images recorded by this Camcorder can be 
played back on a TV.

Insert a recorded tape or card into this 
Camcorder.

≥Be sure that the power of the unit is turned off 

before connecting it to a TV

1

Connect the Camcorder and a TV.

≥Connect the Camcorder and a TV by using 

the Multi cable 

1.

≥If the TV has an S-Video terminal, then also 

connect to this terminal 

2. It allows you to 

enjoy more beautiful images. (Do not forget to 
also connect to the Video and Audio 
terminals.)

2

Turn on this Camcorder and set the mode 
dial to the Tape Playback Mode (or Card 
Playback Mode).

3

Select the input channel on the TV.

≥If the images are not played back correctly on 

the TV (e.g. they are displayed vertically), 
perform the menu operations in accordance 
with the aspect ratio of the TV monitor.
Set [SETUP] >> [TV ASPECT] >> [16:9] or 
[4:3].

4

Move the joystick up to select the [

1/;

icon to start playback.

≥The image and audio are output on the TV.

5

Move the joystick down to select the [

icon to stop playback.

≥Whenever plugging in the S-Video terminal, 

plug in the VIDEO IN terminal and AUDIO IN 
terminal, too.

≥Use the AC adaptor to free you from worrying 

about the battery running down.

ª

If the image or audio from this 
Camcorder is not output on the TV

≥Check that the plugs are inserted as far as they 

go.

≥Check the [12bit AUDIO] settings. (

-50-

)

≥Check the connected terminal.

Check the TV’s input setting (input switch). 
(For more information, please read the 
operating instructions for the TV.) 

ª

To display the on-screen information 
on the TV

The information displayed on the LCD monitor or 
the viewfinder (operation icon, time code and 
mode indication, etc.) can be displayed on the 
TV.

(This operation is only available when using 
the remote control.)

1

Press the [EXT DISPLAY] button on the 
remote control.

≥Press the button again to erase the 

information.

Playing back card

Set to Card Playback Mode.
(An operation icon automatically appears on 
the LCD monitor.)

1

Operate with joystick.

E

:

Plays back the previous picture

D

:

Plays back the next picture

1/∫: Slide show (Plays back the still pictures on 

the card in order) start/pause

≥The power will not turn off when the LCD 

monitor and the viewfinder are closed and 
retracted during Card playback mode.

≥Even if the operation icon does not appear, the 

previous or next picture can be displayed.

≥While the data on a card are played back, do 

not operate the mode dial.

≥When the access lamp is lit, do not remove the 

card.

≥Depending on the picture size, it may take time 

to display the file.

≥If you attempt to play back file recorded in a 

different format or file data is defective, the 
whole display becomes bluish and the 

A/V

A/V

1

2

[VIDEO IN]

[AUDIO IN]

[S-VIDEO IN]

LSQT1091_ENG.book  44 ページ  2006年11月27日 月曜日 午後1時17分