Panasonic PV-GS320 Operating Instruction

Using Quick Movie Magic or MotionDV STUDIO

Using Quick Movie Magic or MotionDV STUDIO

With a PC

57

LSQT1091

Using Quick Movie Magic or 
MotionDV STUDIO

When the OS is Windows 2000/XP, the 
Camcorder can be connected to the personal 
computer with the DV cable.
When the OS is Windows 2000/XP, the 
Camcorder can be connected to the personal 
computer with the USB cable. However, when the 
OS is Windows 2000, USB driver must be 
installed.
≥Do not connect the USB cable until the USB 

driver is installed.

ª

Operating environment

OS:

IBM PC/AT compatible personal computer with 
pre-installed;
Microsoft Windows XP Home Edition/ 
Professional SP2
Microsoft Windows 2000 Professional SP4

CPU:

Intel Pentium III 800 MHz or higher (including 
compatible CPU)

Graphic display:

High Color (16 bit) or more
(32 bit recommended)
Desktop resolution of 1024

k768 pixels or more

(Supporting the overlay of DirectDraw)

Sound:

PCM sound source (Compatible DirectSound)

RAM:

256 MB or more
(Adding more memory enables you to operate the 
personal computer more comfortably.)

Hard disk:

Ultra DMA – 33 or more

Free hard disk space:

640 MB or more
(When you capture video, 1 GB is needed for 
data of approx. 4 minutes.)

Interface:

DV (IEEE1394) terminal (IEEE1394.a)
USB terminal (Hi-Speed USB (USB 2.0) 
compliant) (A type) 

Necessary software:

DirectX 9.0b/9.0c
Windows Media Player 6.4 to 10

Other requirements:

Mouse
≥This software is not compatible with a multi-

CPU environment.

≥This software is not compatible with a multi-boot 

environment.

≥Operation on Microsoft Windows XP Media 

Center Edition, Tablet PC Edition and 64 bit 
operating system is not guaranteed.

ª

Installing USB Driver

Install this when your OS is Windows 2000 SP4. 
(When your OS is Windows XP SP2, installing 
USB driver is not needed.) USB Driver must be 
installed when you connect the Camcorder to the 
PC with the USB cable and use Quick Movie 
Magic or MotionDV STUDIO.
DirectX 9.0b is installed in your PC if it is not 
installed beforehand.
≥When DirectX 9.0b is installed, applications 

supported by previous versions of DirectX may 
not run. In this case, consult the manufacturers 
of the applications disabled.

1

Insert the supplied CD-ROM into the 
personal computer’s CD-ROM drive.

≥Quit all applications.
≥[Setup Menu] appears.

2

Click [USB Driver].

≥The set up program starts running.

3

Depending on your system environment, 
installation of “DirectX 9.0b” may be 
required. Click [Yes] and continue with 
installation.

≥After “DirectX 9.0b” is installed, the computer 

will restart.

≥Do not remove the CD-ROM.
≥Installation may take a little while.

4

Finish installation by following the 
on-screen instructions.

≥Click [Next] and proceed with installation.
≥After completing the installation, Click 

[Finish].

5

Click [OK].

LSQT1091_ENG.book  57 ページ  2006年11月27日 月曜日 午後1時17分