Panasonic VDR-D210, VDR-D230, VDR-D310 Operating Instruction

Connection and recognition Windows

Connection and recognition Windows

102

LSQT1145

With a computer (VDR-D310/VDR-D230)

2

Select the software application to 
be deleted, then click [Change/
Remove] ([Change or Remove] or 
[Add/Remove]).

≥ Proceed with the uninstallation by following the 

on-screen instructions.

≥ After uninstalling the software, be sure to 

reboot the computer.

Connection and 
recognition (Windows)

After the driver and software applications are 
installed, the unit must be connected to the 
computer and be correctly recognized by the 
computer.
≥ Connect after installing the driver and software 

applications.

≥ If the supplied CD-ROM is inserted in the 

computer, remove it. (If the [Setup Menu] is 
running, wait until it finishes, then remove the 
CD-ROM.)

≥ If the recognition procedure is not 

accomplished properly, operation will not be 
possible after connecting the unit to the 
computer.

≥ If the unit fails to operate normally, it may mean 

that you have not conducted the installation or 
recognition procedure properly.

≥ Be sure to finalize DVD-RW (VR format), 

DVD-RW (Video format) and DVD-R on this 
unit, before using them on the computer. 
Un-finalized discs will not be recognized by 
the computer.

¬Connect this unit to the AC adaptor.

1

Insert a disc or card with 
recorded images in the unit, then 
turn on the unit.

2

Connect this unit and a 
computer.

A USB cable (supplied)
≥ Insert the plugs as far as they will go. The unit 

and computer will not operate properly if the 
plugs are not inserted fully.

≥ Do not use any other USB cables except the 

supplied one. (Operation is not guaranteed 
with any other USB cables.)

The USB function selection screen will appear.

3

Select [PC CONNECT(DISC)] or 
[PC CONNECT(CARD)] and press 
the joystick.

This unit is automatically recognized by the 
computer.

≥ When the unit is connected to a computer, 

its power cannot be turned off.
In this case, disconnect the USB cable 
(l 104).

≥ If the unit is connected to a computer when the 

USB function is set to [PC CONNECT(DISC)], 
no image will appear on the LCD monitor or the 
viewfinder.

≥ When this unit is connected to a computer, you 

cannot use this unit’s DISC EJECT lever to 
remove a disc. Use Windows Explorer to right-
click the drive icon for this unit and select 
[Eject].

Connection and recognition 
procedures

A

LSQT1145.book  102 ページ  2006年12月28日 木曜日 午前9時34分