Types of information
Displays information about the current audio signal.
• Even when this unit is set to output bitstream signals directly, the signal may be converted depending on
the specifications and settings of the playback device.
Displays information about the current video signal.
Displays information about the TVs connected to the HDMI OUT jacks.
Use the cursor keys (
) to switch between “OUT1” and “OUT2”.
Displays the network information on this unit.
Displays the system information on this unit.
• If this unit detects a newer firmware over the network, “!” (exclamation mark) appears at the upper right of
the “Information” and “System” icons, and the corresponding message will be displayed in this screen. You
can update the firmware of this unit by pressing ENTER in this screen and following the procedure in
“Updating the firmware of this unit” (p.108).
Displays information about Zone2.
Audio format of the input signal
The number of source channels in the input signal (front/
For example, “5.1 (3/2/0.1)” means 5.1ch in total (3 front
channels, 2 surround channels, and LFE).
The number of samples per second of the input digital signal
The amount of data per second of the input bitstream signal
The dialogue normalization level of the input bitstream signal
The speaker terminals from which signals are output
Presence or absence of HDMI signal input/output
Resolutions of input signal (analog or HDMI) and output signal (HDMI)
Resolutions of input signal (analog) and signal output at the MONITOR
OUT jacks (analog)
Errors related to HDMI
HDCP Error: The TV does not support HDCP (High-bandwidth Digital
Device Over: The number of devices connected to the HDMI OUT jack is
over the limit.
Resolutions supported by the TV
The IP address of the default gateway
DNS Server (P)
The IP address of the primary DNS server
DNS Server (S)
The IP address of the secondary DNS server
Network connection status
The remote control ID setting of the main unit (p.101)
The video signal type setting of this unit (p.102)
The speaker impedance setting of this unit (p.101)
System ID number
The version of firmware installed on this unit
The input source selected for Zone2
The volume setting for Zone2